|
FACULTY OF
ENGINEERING & TECHNOLOGY---Metallurgical & Material Engineering
The department. of Metallurgical Engineering was established in
1956 with the purpose of imparting excellent training to students
who would be able to join several industries as qualified engineers,
dealing with the production and processing of metals and alloys including
foundries, rolling mills and fabrication shops. The focus of post
graduate degree is mainly fixed to train qualified metallurgical engineers
for state of art technologies at different Indian metallurgical industries
Degrees Offered /Intake
Specialization (Subject) Offered
Research Activities
Infrastructural Facilities
Attainments at National Level
Sponsored Projects
Academic Contributions in last five years
Facility for Consultancy Services
Origination of Schools/ Centers
JU Metallurgy Alumni Association (JUMetal)
Activity Calender
--------------------------------------------------------------------------------
Degrees Offered / Intake
Bachelor of Metallurgical
Engineering ( B.Met. E)- 24
Master of Metallurgical Engineering
( M.Met. E. ) - 10
Ph.D.
TOP
--------------------------------------------------------------------------------
Specialization (Subject) Offered
UG Level: Process Control
/ Special Materials / Ferroalloys
PG Level : Industrial Metallurgy
TOP
--------------------------------------------------------------------------------
Research Activities
:: Major research activities
::
Phase Transformation in Metals
Fatigue and Fracture of Metals and Materials
Corrosion
Behaviour
Protection against Corrosion of Metals and Materials
Stress Corrosion Cracking
Corrosion Fatigue Behavior of
Heat Treated and Welded Specimens
Process Metallurgy and
Kinetic Behavior of Metallurgical Processes
Bioleaching of
Minerals
Preparation and Characterization of Glass and
Nanocomposites
Surface Engineering
Non-destructive
Evaluation for Assessment of Fatigue Damage
Joining of
Materials
TOP
--------------------------------------------------------------------------------
Infrastructural Facilities
Chemical Analysis
Wet Chemical Analysis infrastructure; Atomic Absorption Spectrophotometer;
IR
Spectrophotometer
Computer Lab
A fully integrated LAN with Pentium III & Pentium IV units, with standard
Computational Software and Internet.
Electro Chemistry & Corrosion
Stabilised D.C Supply; Potentiostat; Conductivity measurement Bridge;
Stress Corrosion &
Corrosion Fatigue Measurement setup.
Extractive Metallurgy Laboratory
Resistance Tube Furnace; Tube Furnace with Gas Cylinders, Vacuum Pump;
Temperature
Indicators & Controllers; Leaching Unit.
Materials laboratory
High Temperature Atmosphere Control Furnace; Drier; BOD Incubator;
High pressure
Reactor; Humidity Control Chamber; Dt40 Gas Chromatograph.
Material Processing Laboratory
Arc Welding equipments: MMAW, GMAW, GTAW, SAW; Diffusion Bonding
Setup; Wear (ASTM 665) & Erosion Testing (ASTM) setup; SSRT; LCF.
Mechanical Metallurgy Laboratory
Hardness, Impact, Fatigue; Instron; Hot& Cold Rolling Mill; Wire Drawing
unit;
Hydraulic Press.
Metallographic Laboratory
Optical Microscopes (Research & Bench type); Standard Polishing and
Dark room
Facilities; Scanning Electron Microscope.
Mineral Dressing Laboratory
Crushing; Sizing; Grinding; Classification; Mixing units; Flotation;
Jigging; Magnetic
Separator
Scanning Electron Microscope with EDAX attachments
Xray & Metal Physics Laboratory
Phillips X-ray Powder Diffractometer 1840; Powder Diffraction Cameras;
Laue Camera;
Radon House X-ray Generator for Camera work; High Vacuum Coating Unit;
(VICO &
Polaron); D.E Electromagnet with Flat & Tapered Pole Pieces and Measurement
arrangements containing Ballistic Galvanometer; Hall Probe Gaussmeter,
Demagnetiser;
Pulse Field Magnetiser; Waveform Generator Amplifier; Oscilloscope
combination for
Eddy Current Studies; Single Pan Suspension Balance; Ultrasonic Tester
with Probes;
Resistivity Bridge; Dilatometer.
Workshop:
Turning, Drilling, Power Sawing, Grinding facilities; Resistance type
pot and Tube
Furnaces for Melting & Heat Treatment with temperature capability
up to 1450oC;
Resistance type Bell Furnace with temperature capability up to 1700oC;
Temperature Indicators & Controllers; Ferrous Induction Melting Furnace(
5kg) in air-atmosphere.
TOP
--------------------------------------------------------------------------------
Attainments at National Level
The Department has received grants from CSIR, MHRD, AICTE, DST,
ARDB, DAE and Department of Cultural , WB Science & Technology for
different projects of national importance. The department extended
its expertise to organizations in the form of testing consultancy,
and HRD Programmes. Notable among them are CMWSA, SIST, ESAB India
Ltd. GPIL, Hind Motors.
An industry relevant open house discussion on "Emerging Steel Technology"
was organised in 1998 where a senior scientist from Pench Steel Corporation
U.S.A. interacted with senior personnel from top steel producers and
consultants of India.
TOP
--------------------------------------------------------------------------------
Sponsored Projects
|
Sl No.
|
Name of the Projects/Schemes
& In charge |
Financing Authority |
|
1
|
Computer Control of Iron & Steel : Prof. M.K.Mitra.
|
M.H.R.D |
|
2
|
Amophorous Ceramic Materials: Dr. S. Kumar.
|
C.S.I.R |
|
3
|
Development of weld metal for 3.5% Nickel steel in sub-merged
and manual metal arc welding and its stress corrosion and
low cycle corrosion fatigue characteristics: Dr.T.K.Pal.
|
D.S.T |
|
4
|
A study on diffusion bonding of Alumina ceramic to steels:
Dr. T. K. Pal
|
CSIR |
|
5
|
Development of database for Ductile Iron: Prof. B. Chaudhuri
|
ECL |
|
6
|
Fractune Toughness of Glass Metal Nano Composites:
Dr. G.C.Das.
|
AICTE |
|
7
|
Rural Metal Casting : Dr. P.K. Datta.
|
AICTE |
|
8
|
Dev. of Environmental Sensitive Failure
resistant offshore structural steel: Dr.
Pritish Mojumder
|
DST
|
|
9
|
Mod. Of Atomic Absorption Spectroscope:
Dr. B. Bhattacharjee
|
AICTE |
|
10
|
Bioleaching of Polymetallic Sulphide
: Dr. S. Mukherjee
|
AICTE |
|
11
|
Glass Metal Composites : Prof. M.
K. Mitra.
|
AICTE |
|
12
|
Development and characterization
of iron-based hardfacing deposits
for high wear resistance: Dr.
T.K.Pal.
|
DST |
|
13
|
A study on high temperature
impression creep testing of
weldments: Dr. T.K.Pal.
|
AICTE |
|
14
|
Development of welding Consumables
and assessment of weldability
Index for Microalloyed steel:
Dr. T.K.Pal.
|
Ministry of Steel |
|
15
|
Study on Transient Liquid
Phase bonding of AlMMC
|
CSIR |
|
16
|
SCC & LCF properties of
Zircaloy 2 in environment
containing iodine: Dr.
P.Majumder.
|
DAE /BRNS |
|
17
|
SCC Characterization
of ALPHA-Titanium Alloys,
Dr. P.Majumder
|
ARDB |
|
18
|
Study on Impression
Creep Testing of Weldments:
T.K.Pal
|
UGC |
|
19
|
Damage Assessment
and Integrity of
Welded Components:
Dr. T.K.Pal
|
Ministry of Steel
|
|
20
|
Modernization
of X-ray & Metal
Physics Lab: Dr.
P.K.Datta
|
AICTE |
|
21
|
Modernisation
of Optical Met.
Lab Etc.: Prof.
B. Chaudhuri
|
AICTE |
|
22
|
Modernisation
of Materials
Lab: Prof.
B. Chaudhuri
|
AICTE |
|
23
|
Investigations
of the welding
conditions
for hydrogen
management
in Gas Metal
Arc Weld
of High
Strength
Low Alloy
Steel for
high productivity:
Dr. T.K.Pal
|
DST |
|
24
|
Study
on Erosive
Wear Behaviour
of Aluminium
Metal
Matrix
Composites:
Dr. T.
K. Pal
|
CSIR
|
|
25
|
Development
and
characterization
of spot
welding
techniques
for
coated
steel
sheets:
Dr.
T. K.
Pal
|
Ministry
of Steel
& TISCO
|
|
26
|
UGC
DRS
Phase
I:
Prof.
B.
Chaudhuri
|
UGC |
|
27
|
Infrastructural Facility in SEM Lab: Dr. P. K. Mitra
|
FIST,
DST
|
|
28
|
Corrosion and wear of hard materials, welds and composites :
Dr. P. K. Mitra |
DSA,UGC ( 68.5 lakhs+2Project Fellow) |
TOP
--------------------------------------------------------------------------------
Academic Contributions in last five years
Ph.D. Thesis : 5
PG Theses:15
Publications ( National / International) : 50
Seminars / Conferences / Programmes Organised : 5
TOP
--------------------------------------------------------------------------------
Facility for Consultancy Services
Heat Treatment
Mechanical Testing
Corrosion & Stress Corrosion testing
Welding
Foundry
TOP
--------------------------------------------------------------------------------
Origination of Schools/ Centres
School of Material Science & Technology
TOP
--------------------------------------------------------------------------------
JU Metallurgy Alumni
Association (JUMetal)
JUMetal was formed in June 2004 with the
primary aim of bringing the worldwide alumni of JU metallurgy closer
to the department.
Please keep visiting
this page for the activity calendar.
The present working committee of the JUMetal
comprises of seven members. It has been decided that the committee
weill be nominated every two years.
Executive Committee 2004-06
Prof. P.K. Mitra (HOD), Chairman
Mr. Rahul
Sengupta (1979 batch), Vice president
Mr. Sanjay Sadhukhan
(1982 batch), Vice President
Dr. P.C. Chakraborti (1985
batch), Treasurer
Ms. Sarbari Sarkar (1993 batch), Secretary
Mr. Subhabrata Mukherjee (2003 batch), Jt.
Secretary
Final Year representative
Actively participating
in the operations and governance of the JUMetal is a wonderful way
for our alumni to give something back to their alma mater and to
re-connect with the department. Please contact us at alumni@jumetal.org, if you would like to take a more active role in the
association.
We welcome all our alumni to register
themselves and help us in building an alumni database. Please click
here to register .
TOP
--------------------------------------------------------------------------------
Activity Calender
Reunion 2005
Date: 23rd January
2005
Venue: Dept. of Metallurgical Engg.,
Jadavpur University
Registration: 10:00 a.m
onwards
Programme
Sports for
children
Musical Chair for
ladies
Cricket match between present and
ex-students
Lunch
General
body meeting of the alumni
Antakshari
Games
Tea and snacks
Programme ends by 5:00
p.m.
------------------------------------------------------------------
Inaugaral Seminar
Met Alumni Industry Academia 2004
Date: 28th August 2004
Venue: K.P. Basu Memorial Hall, Jadavpur
University
Time: 12:00 noon onwards
Speakers
Mr.
Achintya Das TATA Steel
Mr. Arup Saha BALCO
Mr. Debashis
Bhattacharya TATA Steel
Dr. Dinabandhu Ghosh - Dept. of Met.
Engg, JU
Mr. Niloy Kumar Nath Tata Consultancy Services
Mr.
Nirumpam Chakraborty IIT, Kharagpur
TOP
|
